Our wireless PIR camera detector is a battery powered PIR detector with a difference...... it includes an integrated camera for visual verification and due to its 2-way communication with the Bulldog Secure Alarm control panel, can be programmed and adjusted without the need to remove the sensor
- Upon an intrusion event, or if requested by the homeowner, the camera captures and transmits a sequence of images to the alarm panel which are then sent to your monitoring account so you can see exactly what is happened within the area covered by the PIR.
- The images can then be viewed on your smartphone app or on the website and are stored for future reference. The visual verification feature enables self-monitoring and also reduces the number of false alarms, increasing peace of mind for you and saving time you stress and worry should your alarm be activated.
- Your pet up to 36kg won't trigger the PIR, provided they remain below 1.5m from the floor.
- As with all Bulldog Secure Alarm devices, the PIR will be pre-configured to work with your alarm system, comes with our full support service and instructions.
|Detectors per System|
|32||Programme up to 32 detectors into your Bulldog Secure Alarm|
|10 minutes||Screws and adhesive pads supplied|
|72 x 35 x 32mm||Small and Discreet|
|3 Volt||Our PIR comes pre-installed with a battery so is ready to use with no additional batteries required.|
|12 metres||Typical coverage area|
Passive Infra Red Detector with Camera
- Product Code: BSA-DET-003
- Availability: In Stock
- Ex Tax: £129.21